Electricity
Green transition
Smart metering

Radius creates a data-driven future with turnkey smart meter solution

“Smart meters are a pre-requisite to the green transition – and we’re paving the way.”

– Stephan Alexander Fly, Operations Manager at Radius.

11,500 technician hours saved yearly

EUR 228,579 in yearly savings by identifying neutral faults

The challenge:

Replacing one million manual meters with smart meters

The green energy transition is underway. Now more than ever, the EU is driving energy efficiency, promoting clean fuels and supporting direct electrification of end-use sectors. And Denmark is leading the charge. By 2030, the country aims to reduce CO2 emissions by 70%, and by 2050 the electricity system will be completely independent of fossil fuels.

As a pre-requisite, the Danish Parliament decided in 2013 that all electricity customers in Denmark should have remotely read meters by the end of 2020. At Danish DSO Radius, only 3 per cent of their 1 million customers had smart meters. That meant that approximately 970,000 customers would need to receive a new electricity meter – and a total of one million meters would need to be replaced.

The solution:

Northern Europe’s largest smart metering project

The successful roll-out of a project of this magnitude hinges upon logistics. That’s why Radius put the project to tender as a turnkey delivery. Kamstrup executed the delivery and installation of one million smart meters along with a circuit breaker that allows Radius to disconnect and reconnect customers remotely. 1,500 meters were scheduled to be installed every day, and on good days, the team achieved 2,500. Thanks to meticulous planning, the roll-out ran entirely according to schedule and budget.

CustomerWorld Electricity meter
Discover more
Close

New solution. New opportunities.

Receiving consumption data automatically every day means Radius can better spot errors and service customers. But that’s just the beginning. The turnkey solution also includes a circuit breaker that allows Radius to remotely disconnect and reconnect customers. Today they do between 200 and 250 remote disconnections and reconnections a month, bringing significant savings.

“We have been able to reduce our number of technician visits by more than 25,000. That corresponds to approximately 11,500 technician hours saved yearly,” says Stephan Alexander Fly, Operations Manager at Radius.

Proactive maintenance leads to major savings

“By giving us a better understanding of the load in our low-voltage grid, the smart meter data also enable us to identify theft better, handle faults and guide our customers in case of outages,” says Stephan.

For example, voltage data is collected from the meters daily. If the neutral is disconnected, destructive voltage fluctuations can occur. This can be time consuming and expensive to repair and can result in customer claims and poor customer experience.

“Using data from Kamstrup’s meters, we can identify bad neutral connections, find the meter or the junction box at fault, and fix the issue before it causes in an outage. This results in an estimated savings of EUR 228,579 per year,” says Stephan.

Key to the green transition

The new solution will also play a central role in helping Radius support the green transition. Today, 56 per cent of Danish electricity consumption is covered by wind and solar energy and by 2030, the country’s electricity system will be completely independent of fossil fuels.

On an EU level, the ambition is to reduce CO2 emission by 40%, which will require 32% of the EU’s total energy consumption to be supplied by renewable energy. This shift towards increasing amounts of renewable energy will change the way Radius work with their grid.

By 2030, the goal is a reduction of 70% CO2 emissions. By 2050, the ambition is to be fossil-free.

“The billions of data values help us find opportunities to trim our networks and balance loads. In our view, smart meters and the data they provide are the key to the green transition,” says Stephan.

Preparing for an electrified future

By 2030, European roads will host 30 million electric cars. Although, critical to the green transition’s success, the rising popularity of sustainable choices like heat pumps and electric cars is expected to create unprecedented electricity usage peaks. Radius can prepare for this by expanding their grid or by trying to balance the load more evenly.

“The electricity grid is robust, but in future, we will see much higher peaks which will challenge our current maximum capacity, “Stephan predicts. “As everything from heating and cooling to cars and trains becomes electric, we need all the data we can get to protect the grid and manage distribution in the smartest, most economically viable way.”

Radius relies on flexible tariffs to help move consumption outside of peak hours. The tariffs let consumers pay less to, for example, run their dishwashers at midnight compared to running them at 20.00. To bill accurately with flexible tariffs requires reliable consumption data. That’s where smart meters play a key role.

Data-based investment decisions

With an overview of the grid status, Radius is now better positioned to plan its investments. For example, if an error has occurred many times before, it could mean it’s time to invest in a new cable or a new transformer station.

“Renewing the entire grid to handle peaks in energy production would require lots of digging, laying down cables, building transformers, etc. – a very cost-intensive and disruptive process,” says Stephan. “We want to invest wisely in balancing energy loads to relieve the grid of pressure and avoid energy wastage. Then we can stage our investments in expanding the grid. This is better for the economy and better for society at large.”

Close

“When the electric car boom hits, we can use our data to quickly analyse where to take action first, identify unknown bottlenecks and possibly distribute the load. That way, we can focus our efforts and stage our investments in expanding the grid.”

– Stephan Alexander Fly, Operations Manager at Radius.

Windmill

Your full-service partner

Providing an integrated solution that covers the entire smart metering value chain, we enable utilities to simplify their smart metering operations and run an efficient grid.
Windmill

Learn more

Want to hear more about our intelligent metering solutions? Get in touch with our experts who can help you find the right tools to solve your challenges.

Let’s get the conversation started

How can we help you today?

I need

I want to

I wish to

1 2 3 4 5 6

Related customer cases